Scanning
43
2
h Adjust the following settings, if needed, in the Scanner Setup dialog box:
1 Paper source
2 Picture type
3 Adjust the quality of the scanned picture
4 Page size
i Choose Document Feeder from the Paper source drop-down list (1).
j Choose the picture type (2).
k Choose the Page size from the drop-down list (4).
l If you want to change some advanced settings, click Adjust the quality of the scanned picture (3).
You can choose Brightness, Contrast, Resolution and Picture Type from Advanced Properties.
Click OK after you choose the settings.
1
2
3
4
To Next Page
Loading...
