7 - 4 QUICK-DIAL NUMBERS AND DIALING OPTIONS
Changing One-Touch and Speed-Dial numbers
If you try to store a One-Touch or Speed-Dial number where a
number has already been stored, the LCD will show the name that
has been stored there (or number) and will ask you to do one of the
following:
1
Press
1
to change the stored
number.
—OR—
Press
2
to exit without making a change.
How to change the stored number:
■
If you want to erase the whole number or whole name, press
Stop/Exit
when the cursor is under the first the digits or
letters. The characters above and to the right of the cursor
will be deleted.
■
If you want to change a character, use or to position
the cursor under the character you want to change, and then
type over it.
2
Enter a new number.
Press
Menu/Set
.
3
Follow the directions beginning at Step 4 in Storing One-Touch
Dial numbers and Storing Speed-Dial numbers. (See
Storing
One-Touch Dial numbers on page 7-1 and Storing Speed-Dial
numbers on page 7-3.)
1.Change 2.Exit
To Next Page
Loading...
Need help?
General
