SETUP SEND 6 - 12
Canceling a job while scanning, dialing and
sending the original
You can cancel a job while you are scanning it into memory by
pressing
Stop/Exit
.
You can also cancel a job while the machine is dialing or sending the
original by pressing
Stop/Exit
.
Canceling a scheduled job
You can cancel a fax job that is stored and waiting in memory.
1
Press
Menu/Set
,
2
,
6
.
Any jobs that are waiting will appear
on the LCD.
2
If you have more than two jobs waiting, press or to
select the job you want to cancel.
Press
Menu/Set
.
—OR—
If you only have one job waiting, go to Step 3.
3
Press
1
to cancel.
—OR—
Press
2
to exit without canceling.
To cancel another job go to Step 2.
4
Press
Stop/Exit
.
6.Remaining Jobs
To Next Page
Loading...
Need help?
General
