2 - 8 LOADING ORIGINALS AND PAPER
To load glossy paper
1
Fan the stack of glossy paper well.
2
Put a sheet of plain paper in the paper tray first, and then put the
stack of glossy paper on top of it.
To load envelopes
1
Before loading, press the corners and sides of the envelopes to
make them as flat as possible.
2
Press and slide the paper guide to fit the width of the envelopes.
Insert them into the paper tray with the address side toward you
and pointed in the direction below.
If the glossy sheets are ‘double-feeding’, put one sheet in the
paper tray at a time.
If the envelopes are ‘double-feeding’, put one envelope in the
paper tray at a time.
Print Side
Maximum Paper Mark
To Next Page
Loading...
Need help?
General
