TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 4
Original jam
If the original is jammed, follow the steps below.
Original is jammed inside the front of the control panel.
1
Remove any paper from the ADF that is not jammed.
2
Pull the jammed original out toward the front of the machine.
3
Press Stop/Exit.
Original is jammed inside the back of the control panel.
1
Remove any paper from the ADF that is not jammed.
2
Open the control panel cover.
3
Pull the jammed original out toward the back of the machine.
4
Close the control panel cover.
Control Panel Cover
To Next Page
Loading...
Need help?
General
