SETUP RECEIVE 5 - 5
Easy Receive (FAX-1820C only)
When you use this feature, you don’t have to press
Black Start
,
Color Start
, or the Fax Receive Code
5 1
when you answer a
fax call and hear calling beeps. Just hold the handset and wait a few
seconds. When you see
Receiving
on the LCD or when you hear
“chirps” through the handset of an extension phone connected to
another wall jack, just replace the handset. Your machine does the
rest. Selecting
On
allows the machine to receive fax calls
automatically, even if you lift the handset of an extension or external
phone. Selecting
Semi
lets the machine receive the call only if you’ve
answered it at the machine. Selecting
Off
means you’ll have to
activate the machine yourself, by pressing
Black Start
or
Color
Start
or by pressing
5 1
if you are not at your machine.
(See Operation from extension telephones on page 5-7 and For
Fax/Tel mode only on page 5-7.)
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu/Set
,
2
,
1
,
3
.
3
Use or to select
On
,
Semi
, or
Off
.
Press
Menu/Set
.
4
Press
Stop/Exit
.
If you’ve set the feature to
ON
, but your machine doesn’t
automatically connect a fax call when you lift an external or
extension phone handset, press the Fax Receive code
5 1
.
At the machine, lift the handset and then press
Black Start
or
Color Start
.
If you send faxes from a computer on the same phone line and
the machine intercepts them, set Easy Receive to
Off
.
3.Easy Receive
To Next Page
Loading...
Need help?
General
