Brother MFC-3220C - Page 149

TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 12
STEP A: Color block quality check
The LCD shows:
4
Check the quality of the four color
blocks on the sheet. (Black/Cyan/Yellow/Magenta).
5
If all lines are clear and visible, press
1
(
Yes
) to go to STEP B.
—OR—
If you can see missing short lines as shown below, press
2
(
No
).
The LCD will ask you if the print
quality is OK for each color.
6
Press
2
(
No
) for any color with a
problem.
The LCD shows:
Press
1
(
Yes
). The machine will
start cleaning the colors.
7
After cleaning is finished, press
Black Start
or
Color Start
.
The machine will start printing the Print Quality Check Sheet
again and then return to STEP A.
8
If STEP A is OK, press
1
to proceed to STEP B.
OK Poor
Is Step “A” OK?
1.Yes 2.No
Black OK?
1.Yes 2.No
Start Cleaning?
1.Yes 2.No