Brother MFC-7225N - Page 113

Confidential
5-44
(12) Remove the thermistor ASSY harness from the four hooks.
(13) Remove the cup B M3x12 taptite screw, and then remove the thermistor ASSY.
NOTE: When re-assembling the thermistor ASSY to the fuser frame, ensure the direction of
the thermistor ASSY is correct referring to the figure below;
Thermistor ASSY
Taptite, cup B M3x12
Hooks
Hooks
Fuser frame
Thermistor ASSY harness
Fuser frame
Heat rolle
r
Thermistor ASSY
Taptite, cup B M3x12