Brother MFC-730 - Using the Paper Type Key; Using the Brightness Key

91
COPY OPERATIONS
Using the Paper Type Key (This is a temporary setting)
If you use premium paper, the copy quality is improved. You can choose
PLAIN, INK JET, GLOSSY, and TRNSPRNCY. For best results, we
recommend using Brother Special paper.
1
Insert the document face down in the feeder.
2
Press Paper Type. The screen displays the default setting, for
example:
PAPER:PLAIN
ONLINE
SELECT { } & SET
ONLINE
3
Press or to select a paper type.
PAPER:PLAIN
PAPER:INK JET
PAPER:GLOSSY
PAPER:TRNSPRNCY
If you are using Brother coated paper for 360 dpi (BP36CA) or 720 dpi
(BP72CA) or if you are using non-Brother ink jet paper, select INK JET.
4
Press Set. If you did not select INK JET, skip to Step 6.
5
If you selected INK JET, press or to select 360DPI
(Brother 360 x 360), 720DPI (Brother 720 x 720) or OTHER
(non-Brother ink jet) paper type.
6
Press Set.
Using the Brightness Key (This is a temporary setting)
You can choose brightness setting before making a copy.
1
Insert the document face down in the feeder.
2
Press Brightness.
3
Press to make a darker copy.
—OR—
Press
to make a lighter copy.
4
Press Set when the screen displays your setting.