Brother MFC-730 - Storing Speed Dial Numbers

74
CHAPTER EIGHT
6
Press Set. The screen prompts you to select the type of number this
is. Use
or to select the type you want.
FAX a fax number
TEL a telephone (voice) number
F/T both a fax and telephone (voice) number
7
Press Set.
8
Return to Step 2 to store another One Touch Dial number —OR—
Press Stop to exit.
When you dial a One Touch Dial number, the screen displays the name
you have stored, or, if you have not stored a name, the number you have
stored.
Storing Speed Dial Numbers
You can store Speed Dial numbers, which you dial by pressing only three
keys. There are 56 (MFC-730) and 100 (MFC-740) Speed Dial locations.
Even if you lose electrical power, numbers stored in memory will not be
lost.
1
Press Menu, 1, 6, 2. The screen prompts you to enter a location.
SPEED-DIAL? #
2
Use the dial pad to enter a two-digit location (01–56 for MFC-730)
(00–99 for MFC-740).
3
Press Set. The screen displays your entry, then prompts you to enter
the number you’re storing.
#05:
ENTER & SET
4
Enter the number (up to 20 digits).
5
Press Set. The screen now prompts you to store a name with this
number.
NAME:
6
Use the dial pad to enter the name (up to 15 characters). You can use
the chart of “Entering Text” in chap. 5 to help you enter letters ––
OR–– go to Step 7 to store the number without a name.
7
Press Set.
See
“Speed
Dialling”
chap. 9