Brother MFC-730 - Remote Fax Options; (Only for MFC-730); Fax Forwarding; Programming a Fax Forwarding Number

10
CHAPTER TEN
Remote Fax
Options
(Only for MFC-730)
81
This chapter is for Model MFC-730. If you have model MFC-740 your
remote fax options are handled by the Message Manager. Please see
chapter 12, “Message Manager”.
Fax Forwarding
You cannot use Fax Forwarding when “Fax Storage” is set to OFF.
Programming a Fax Forwarding Number
When Fax Forwarding is set to ON, your fax machine stores the received
fax in memory, then dials the fax number you’ve programmed, and
forwards the fax message.
1
Press Menu, 1, 8, 1.
2
Press or to select ON (or OFF).
FAX FWD:ON
3
Press Set. The screen prompts you to enter the number of the fax
machine where faxes will be forwarded.
FWD#:
ENTER & SET
4
Enter the forwarding number (up to 20 digits).
5
Press Set.
6
Press Stop to exit.
See
“Changing
the Fax
Forwarding
number”
in this
chapter.