Brother MFC-730 - Changing Remote Codes; To Change Remote Codes; Printing a Fax from Memory (Only for MFC-730)

50
CHAPTER SIX
If you’re at an extension phone, you’ll need to lift the handset during the
F/T Ring Time and press # 5 1 between the F/T pseudo-rings. If no one
is on the line, or if someone wants to send you a fax, send the call back
to the MFC by pressing
5 1.
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset
Activation Code is
5 1. The preset Deactivation Code is # 5 1.
If you are always disconnected when accessing your external TAD
remotely, try changing the Activation Code from
5 1 to # # # and the
Deactivation Code from # 5 1 to 1 1 1. You cannot use the same number
for the Activation Code and the Deactivation Code.
To change Remote Codes
1
Press Menu, 1, 2, 4.
2
Press or to select ON (or OFF).
REMOTE ACT.:ON
3
Press Set when the screen displays the setting you want.
4
If you want to, enter a new Remote Activation Code, then press Set.
ACT.CODE:*51
5
If you want to, enter a new Remote Deactivation Code, then press
Set.
DEACT.CODE:#51
6
Press Stop to exit.
Printing a Fax from Memory (Only for MFC-730)
If you have fax storage ON for remote retrieval, you can still print a fax
from the machine’s memory when you are at your machine:
1
Press Menu, 1, 8, 4.
2
Press Start .
3
After all the data saved in the memory is printed out. Press Stop.