Brother MFC-730 - Computer Requirements; Installing Drivers for Your MFC -730 in Windows; Software; Drivers

137
SETTING UP THE MFC AND COMPUTER TO WORK TOGETHER
Computer Requirements
Recommended system requirements for the communication software
suite provided are:
• Windows
®
3.1, 3.11, 95, 98, NT
®
Workstation Version 4.0
• IBM PC Pentium 75 or higher
• 16 MB Ram [32 MB Highly Recommeded]
• 50 MB of Hard Disk Space [MFC-740 only]
• Floppy Disk drive [MFC-730 only]
• CD Rom Drive [MFC-740 only]
NOTE: Use only a shielded Interface cable that is IEEE 1284 compliant
and less than 2m (6.5 feet) long.
Installing Drivers for your MFC -730
in Windows
®
Software / Drivers
The following software is provided to optimize the use of your MFC.
The software can run in Windows
®
3.1, 3.11, 95, 98 and NT
®
Workstation
Version 4.0.
• Printer Driver*- The printer driver creates the print data from the
applications, controls transmission and makes
settings for printing. It is necessary to install the
MFC-730 printer driver into your PC for printing.