Brother MFC-730 - Setting up the MFC and Computer to Work Together; Before You Begin; Connecting the MFC to Your Computer

16
CHAPTER SIXTEEN
Setting Up the
MFC and
Computer to
Work Together
135
Before You Begin
1
Make sure you have an IEEE 1284 compliant, bi-directional parallel
interface cable.
2
Disconnect the telephone line cord, then unplug the MFC power cord
from the electrical outlet before connecting the parallel interface
cable.
3
Make sure your computer is unplugged from electrical power before
you connect the interface cable.
Connecting the MFC to Your Computer
1
Connect the interface cable to the parallel interface port on the back
of the MFC, and secure with the wire clips.
2
Connect the interface cable to the printer port of your computer, and
secure with the two screws. (To locate your computer’s printer port,
see your computer’s user guide.)