Brother MFC-730 - Programming the Paging Number; Remote Retrieval

109
MESSAGE MANAGER (ONLY FOR MFC-740)
2
Press or to reach
PAGING MSG.
3
Press Set.
4
Press Record, then pick up the handset to record a message.
5
Press Stop. The Message Manager plays your OGM.
6
Press Stop.
Programming the Paging Number
1
Press Menu, 1, 8, 6.
2
Press or until the screen displays
PAGING
3
Press Set. The screen prompts you to enter your pager number.
PAG#:
ENTER & SET
4
Enter your paging number up to 20 digits. This is the telephone
number which your MFC must call.
5
Press Set.
6
Press Stop to exit.
You cannot change a Paging number remotely.
Remote Retrieval
You can call your machine from any fax machine using touch tone and
use a Remote Access Code and other button presses to retrieve voice (and
fax) messages. You can also program and change some settings for your
Message Manager.