To Next Page
J
john54Aug 31, 2025
What to do if my Brother Printer says 'Front Cover Open'?
- Pparker06Sep 1, 2025
If your Brother printer displays 'FRONT COVER OPEN', close the front cover of the machine.
What to do if my Brother Printer says 'Front Cover Open'?
If your Brother printer displays 'FRONT COVER OPEN', close the front cover of the machine.
How to fix 'Print Overrun' error on Brother Printer?
If your Brother printer shows a 'PRINT OVERRUN' error, you can press the Go button to print the remaining data in the printer's memory. Alternatively, cancel the print job to delete the remaining data. If the error persists, try reducing the complexity of your document or lowering the print resolution. For HL-2250DN / HL-2270DW models, you can also adjust the following settings in the Windows driver: Graphics, TrueType mode, and Use Printer TrueType Fonts, experimenting to find the best combination for your document. Access these settings by choosing the Basic tab, selecting Manual in Print Settings, and then clicking Manual Settings.
What to do if my Brother Printer says 'JAM TRAY 1 JAM INSIDE JAM REAR JAM DUPLEX 1'?
If your Brother printer is showing a 'JAM TRAY 1 JAM INSIDE JAM REAR JAM DUPLEX 1' error, this indicates a paper jam in one of those areas. You should clear the jammed paper from the area indicated.
What does 'Size mismatch' mean on my Brother MFC-7360N All in One Printer?
If your Brother All in One Printer displays 'Size mismatch', it means that the paper in the tray is not the correct size. Load an appropriate size of paper in the tray, and re-set the 'Paper Size'.
What does 'Toner Ended' mean on my Brother All in One Printer and how to resolve it?
The 'Toner Ended' message on your Brother All in One Printer means it is time to replace the toner cartridge. Replace the toner cartridge with a new one to resolve this.
What does 'Toner Ended' mean on my Brother MFC-7360N?
If your Brother All in One Printer displays 'Toner Ended', it means it is time to replace the toner cartridge with a new one.
What does 'DR Mode in Use' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'DR Mode in Use', it means the machine is set to Distinctive Ring mode, and you cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off.
What to do if Brother All in One Printer shows 'Disconnected'?
If your Brother All in One Printer displays 'Disconnected', it means the other person or their fax machine stopped the call. Try sending or receiving again.
How to resolve 'Toner Low' message on Brother All in One Printer?
If your Brother All in One Printer displays 'Toner Low', it means the toner is running low. It is recommended to purchase a new toner cartridge before you receive a 'Replace Toner' message.
How to fix 'No Paper' error on my Brother All in One Printer?
If your Brother All in One Printer shows a 'No Paper' error, it means the printer is out of paper or the paper is not loaded correctly. Refill the paper tray and press Start. Alternatively, remove the paper and load it again, then press Start. If the problem persists, the paper pick-up roller may need cleaning.
General| Duplex printing | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Scan to | E-mail, File, Image, OCR |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Image formats supported | BMP, JPG, PNG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| PC free copying | Yes |
| Maximum copy resolution | 600 x 600 DPI |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Dimensions (WxDxH) | 405 x 399 x 316 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Compatible operating systems | Linux Mac OS X 10.4.11, 10.5.x, 10.6x Windows 7, Vista, XP, 2000 |
| Faxing | Mono faxing |
| Fax memory | 400 pages |
| Modem speed | 14.4 Kbit/s |
| Fax speed dialing (max numbers) | 208 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Total number of input trays | 1 |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Internal memory | 32 MB |
| Processor family | ARM |
| Compatible memory cards | Not supported |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Maximum print size | 216 x 356 mm |
| Media weight (tray 1) | 60 - 105g/m2 |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Non-ISO print media sizes | Executive |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Supported network protocols (IPv4) | TCP/IP (IPv4 & IPv6) |
| Direct printing | - |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power consumption (standby) | 0.9 W |
| Power consumption (PowerSave) | 65 W |
| Power consumption (average operating) | 495 W |
| Package weight | 14800 g |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | 10000 pages per month |
Explains symbols and conventions used in the manual for warnings, cautions, and notes.
Details warnings about electrical hazards, hot surfaces, and handling the product safely.
Provides safety instructions for using the power cord and extension cords.
Guidance on how to read and understand the user documentation for the machine.
Instructions on how to access the Advanced User's Guide, Software User's Guide, and Network User's Guide.
Information on how to access Brother support online, by phone, and through customer service.
Explains the function of each key on the control panel, including One Touch, FAX, COPY, PRINT, and LCD.
Instructions for setting paper type and size to ensure optimal print quality.
Guidelines for handling and using special paper types like envelopes and labels.
How to change fax resolution for better quality, for next fax or default settings.
Instructions on how to send the same fax message to multiple recipients efficiently.
Enables sending important documents immediately without waiting for memory transmission.
Guides on selecting the appropriate receive mode based on telephone line services.
Allows receiving faxes automatically even if the call is answered manually.
Options to receive faxes remotely, including Fax Forwarding, Paging, Fax Storage, and PC-Fax Receive.
Chart showing options for storing One Touch or Speed Dial numbers with IFAX and E-mail.
Instructions on how to set up Group numbers for sending the same fax to many recipients.
Procedures for replacing toner cartridges and drum units when indicated by the machine.
Steps for cleaning the machine's exterior, scanner, and corona wire for optimal performance.
List of common error messages, their causes, and recommended actions to resolve them.
Troubleshooting tips for issues related to paper feeding, jams, and curling.
Guidance for resolving issues with network printing, scanning, and PC-Fax features.
Explains how to navigate the menu table to program machine settings and options.
Details on setting up TX Lock, Secure Function Lock, and Setting Lock for machine security.
Provides information on printer type, memory, power source, and consumption.
Details on supported document sizes, paper types, weights, and output tray capacity.
Technical details for fax capabilities, modem speed, resolution, and copy functions.
