What does 'Manual Feed' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Manual Feed', it means Manual Feed was selected as the paper source when there was no paper in the manual feed slot. Place a sheet of paper in the manual feed slot.
What does 'DR Mode in Use' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'DR Mode in Use', it means the machine is set to Distinctive Ring mode, and you cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off.
What to do if my Brother All in One Printer says 'Cooling Down Wait for a while'?
If your Brother All in One Printer displays 'Cooling Down Wait for a while', it means the drum unit or toner cartridge is too hot. Ensure the fan is spinning and the exhaust outlet isn't blocked. If the fan works, remove any obstructions around the exhaust outlet and let the machine sit idle for several minutes. If the fan isn't spinning, disconnect and reconnect the machine from the power source after a few minutes.
What does 'Limit Exceeded' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Limit Exceeded', it means the Page Limit set in Secure Function Lock 2.0 for your ID was reached. Contact your administrator to check your Secure Function Lock Settings.
How to fix 'Cartridge Error' on a Brother MFC-7360N?
If you're seeing a 'Cartridge Error' on your Brother All in One Printer, the toner cartridge might not be installed correctly. Pull out the drum unit, remove the toner cartridge, and then reinstall it into the drum unit.
What to do if my Brother MFC-7360N says 'Cover is Open'?
The 'Cover is Open' error on your Brother All in One Printer indicates that a cover is not completely closed. Here's what to check: - Ensure the front cover is fully closed. - Ensure the ADF cover is fully closed. - If loading a document, close the ADF cover and press Stop/Exit. - Ensure the fuser cover is closed, especially after a paper jam.
Why does my Brother MFC-7360N All in One Printer say 'No Toner'?
If your Brother All in One Printer displays 'No Toner', the toner cartridge might not be installed correctly. Pull out the drum unit, remove the toner cartridge, and then reinsert it back into the drum unit.
How to fix 'Size mismatch' error on Brother MFC-7360N All in One Printer?
A 'Size mismatch' error on your Brother All in One Printer means the paper in the tray is not the correct size. Load an appropriate size of paper in the tray, and reset the “Paper Size”.
What does 'Disconnected' mean on my Brother All in One Printer during faxing?
If your Brother All in One Printer displays 'Disconnected' during faxing, it means the other person or their fax machine stopped the call. Try sending or receiving again.
How to fix 'Fuser Error' on Brother MFC-7360N?
A 'Fuser Error' on your Brother All in One Printer means the fuser unit's temperature isn't rising to the required level within the specified time. Turn the power off, wait a few seconds, and then turn it back on. Leave the machine on for 15 minutes.
General| Duplex printing | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Scan to | E-mail, File, Image, OCR |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Image formats supported | BMP, JPG, PNG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| PC free copying | Yes |
| Maximum copy resolution | 600 x 600 DPI |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Dimensions (WxDxH) | 405 x 399 x 316 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Compatible operating systems | Linux Mac OS X 10.4.11, 10.5.x, 10.6x Windows 7, Vista, XP, 2000 |
| Faxing | Mono faxing |
| Fax memory | 400 pages |
| Modem speed | 14.4 Kbit/s |
| Fax speed dialing (max numbers) | 208 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Total number of input trays | 1 |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Internal memory | 32 MB |
| Processor family | ARM |
| Compatible memory cards | Not supported |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Maximum print size | 216 x 356 mm |
| Media weight (tray 1) | 60 - 105g/m2 |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Non-ISO print media sizes | Executive |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Supported network protocols (IPv4) | TCP/IP (IPv4 & IPv6) |
| Direct printing | - |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power consumption (standby) | 0.9 W |
| Power consumption (PowerSave) | 65 W |
| Power consumption (average operating) | 495 W |
| Package weight | 14800 g |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | 10000 pages per month |
Explains symbols and conventions used in the manual for warnings, cautions, and notes.
Details warnings about electrical hazards, hot surfaces, and handling the product safely.
Provides safety instructions for using the power cord and extension cords.
Guidance on how to read and understand the user documentation for the machine.
Instructions on how to access the Advanced User's Guide, Software User's Guide, and Network User's Guide.
Information on how to access Brother support online, by phone, and through customer service.
Explains the function of each key on the control panel, including One Touch, FAX, COPY, PRINT, and LCD.
Instructions for setting paper type and size to ensure optimal print quality.
Guidelines for handling and using special paper types like envelopes and labels.
How to change fax resolution for better quality, for next fax or default settings.
Instructions on how to send the same fax message to multiple recipients efficiently.
Enables sending important documents immediately without waiting for memory transmission.
Guides on selecting the appropriate receive mode based on telephone line services.
Allows receiving faxes automatically even if the call is answered manually.
Options to receive faxes remotely, including Fax Forwarding, Paging, Fax Storage, and PC-Fax Receive.
Chart showing options for storing One Touch or Speed Dial numbers with IFAX and E-mail.
Instructions on how to set up Group numbers for sending the same fax to many recipients.
Procedures for replacing toner cartridges and drum units when indicated by the machine.
Steps for cleaning the machine's exterior, scanner, and corona wire for optimal performance.
List of common error messages, their causes, and recommended actions to resolve them.
Troubleshooting tips for issues related to paper feeding, jams, and curling.
Guidance for resolving issues with network printing, scanning, and PC-Fax features.
Explains how to navigate the menu table to program machine settings and options.
Details on setting up TX Lock, Secure Function Lock, and Setting Lock for machine security.
Provides information on printer type, memory, power source, and consumption.
Details on supported document sizes, paper types, weights, and output tray capacity.
Technical details for fax capabilities, modem speed, resolution, and copy functions.
To Next Page