What to do if my Brother All in One Printer displays 'Out of Memory'?
If your Brother All in One Printer’s memory is full during fax sending or copying: Press Start to send or copy the scanned pages, or press Stop/Exit and wait for other operations to finish. You can also clear faxes from memory by printing them, then turn off Fax Storage. If a print operation is in process, reduce the print resolution or clear faxes from memory.
What to do if my Brother All in One Printer displays 'BT Call Sign On (U.K. only)'?
If your Brother All in One Printer displays 'BT Call Sign On (U.K. only)', it means BT Call Sign is set to On, preventing you from changing the Receive Mode from Manual. Set BT Call Sign to Off to resolve this.
What does 'Fuser Error' mean on my Brother All in One Printer and how to resolve it?
If your Brother All in One Printer displays 'Fuser Error', it means the temperature of the fuser unit did not rise to the specified temperature within the specified time. Turn the power off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on.
Why does my Brother MFC-7360N say 'Manual Feed'?
The 'Manual Feed' message on your Brother All in One Printer appears when Manual Feed is selected as the paper source, but there's no paper in the manual feed slot. Place a sheet of paper in the manual feed slot.
How to resolve 'Size Error DX' on Brother MFC-7360N?
A 'Size Error DX' on your Brother All in One Printer means the paper in the tray isn't suitable for automatic duplex printing. Load either Letter, Legal, or Folio paper for automatic duplex printing.
What to do if my Brother MFC-7360N says 'DR Mode in Use'?
The message 'DR Mode in Use' on your Brother All in One Printer means the machine is set to Distinctive Ring mode, preventing you from changing the Receive Mode from Manual to another mode. Set Distinctive Ring to Off.
What does 'Access Denied' mean on my Brother All in One Printer?
The 'Access Denied' message on your Brother All in One Printer means the function you're trying to use is restricted by Secure Function Lock. Contact your administrator to check your Secure Function Lock settings.
Why does my Brother All in One Printer say 'Cartridge Error'?
A 'Cartridge Error' message on your Brother All in One Printer indicates that the toner cartridge is not installed correctly. To resolve this, pull out the drum unit, remove the toner cartridge, and then re-install the toner cartridge into the drum unit.
What to do if Brother All in One Printer shows 'Disconnected'?
If your Brother All in One Printer displays 'Disconnected', it means the other person or their fax machine stopped the call. Try sending or receiving again.
What does 'Size mismatch' mean on my Brother All in One Printer and how to fix it?
If your Brother All in One Printer displays 'Size mismatch', it means the paper in the tray is not the correct size. Load an appropriate size of paper in the tray and reset the “Paper Size”.
General| Duplex printing | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Scan to | E-mail, File, Image, OCR |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Image formats supported | BMP, JPG, PNG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| PC free copying | Yes |
| Maximum copy resolution | 600 x 600 DPI |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Dimensions (WxDxH) | 405 x 399 x 316 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Compatible operating systems | Linux Mac OS X 10.4.11, 10.5.x, 10.6x Windows 7, Vista, XP, 2000 |
| Faxing | Mono faxing |
| Fax memory | 400 pages |
| Modem speed | 14.4 Kbit/s |
| Fax speed dialing (max numbers) | 208 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Total number of input trays | 1 |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Internal memory | 32 MB |
| Processor family | ARM |
| Compatible memory cards | Not supported |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Maximum print size | 216 x 356 mm |
| Media weight (tray 1) | 60 - 105g/m2 |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Non-ISO print media sizes | Executive |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Supported network protocols (IPv4) | TCP/IP (IPv4 & IPv6) |
| Direct printing | - |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power consumption (standby) | 0.9 W |
| Power consumption (PowerSave) | 65 W |
| Power consumption (average operating) | 495 W |
| Package weight | 14800 g |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | 10000 pages per month |
Explains symbols and conventions used in the manual for warnings, cautions, and notes.
Details warnings about electrical hazards, hot surfaces, and handling the product safely.
Provides safety instructions for using the power cord and extension cords.
Guidance on how to read and understand the user documentation for the machine.
Instructions on how to access the Advanced User's Guide, Software User's Guide, and Network User's Guide.
Information on how to access Brother support online, by phone, and through customer service.
Explains the function of each key on the control panel, including One Touch, FAX, COPY, PRINT, and LCD.
Instructions for setting paper type and size to ensure optimal print quality.
Guidelines for handling and using special paper types like envelopes and labels.
How to change fax resolution for better quality, for next fax or default settings.
Instructions on how to send the same fax message to multiple recipients efficiently.
Enables sending important documents immediately without waiting for memory transmission.
Guides on selecting the appropriate receive mode based on telephone line services.
Allows receiving faxes automatically even if the call is answered manually.
Options to receive faxes remotely, including Fax Forwarding, Paging, Fax Storage, and PC-Fax Receive.
Chart showing options for storing One Touch or Speed Dial numbers with IFAX and E-mail.
Instructions on how to set up Group numbers for sending the same fax to many recipients.
Procedures for replacing toner cartridges and drum units when indicated by the machine.
Steps for cleaning the machine's exterior, scanner, and corona wire for optimal performance.
List of common error messages, their causes, and recommended actions to resolve them.
Troubleshooting tips for issues related to paper feeding, jams, and curling.
Guidance for resolving issues with network printing, scanning, and PC-Fax features.
Explains how to navigate the menu table to program machine settings and options.
Details on setting up TX Lock, Secure Function Lock, and Setting Lock for machine security.
Provides information on printer type, memory, power source, and consumption.
Details on supported document sizes, paper types, weights, and output tray capacity.
Technical details for fax capabilities, modem speed, resolution, and copy functions.
To Next Page