To Next Page
L
Lisa FreemanSep 12, 2025
What does drum stop mean on Brother All in One Printer?
- VVictor ButlerSep 12, 2025
The message 'Drum Stop' on your Brother All in One Printer indicates that it is time to replace the drum unit.
What does drum stop mean on Brother All in One Printer?
The message 'Drum Stop' on your Brother All in One Printer indicates that it is time to replace the drum unit.
How to fix a 'Cartridge Error' on my Brother MFC-7360N All in One Printer?
If your Brother All in One Printer shows a 'Cartridge Error', it means the toner cartridge might not be installed properly. To fix this, pull out the drum unit, remove the toner cartridge, and then reinstall the toner cartridge back into the drum unit.
What to do if cover is open on Brother MFC-7360N All in One Printer DCP-7065DN?
If your Brother All in One Printer DCP-7065DN displays 'Cover is Open', the ADF cover is not completely closed. Close the ADF cover of the machine.
What does init unable XX mean on Brother MFC-7360N?
If your Brother All in One Printer displays 'Init Unable XX', the machine has a mechanical problem. Disconnect the machine from the power for several minutes and then reconnect it.
What to do if my Brother All in One Printer says 'No Paper'?
If your Brother All in One Printer displays a 'No Paper' error, it means the printer is either out of paper or the paper isn't loaded correctly. You can refill the paper in the tray and press Start, or remove the paper and load it again, then press Start.
What does 'Cover is Open' mean on my Brother MFC-7360N and how do I fix it?
The 'Cover is Open' error on your Brother All in One Printer indicates that one of the covers isn't fully closed. Make sure the front cover, the ADF cover, and the fuser cover are all completely closed. Also, check for any paper jams at the back of the machine.
What to do if my Brother MFC-7360N says 'Out of Memory'?
If your Brother All in One Printer displays 'Out of Memory', it signifies that the printer's memory is full. If fax sending or copying is in progress, you can press Start to continue or Stop/Exit to wait for other operations to finish. Clearing faxes from memory or reducing print resolution can also help.
What does 'Toner Ended' mean on my Brother MFC-7360N?
If your Brother All in One Printer displays 'Toner Ended', it means it is time to replace the toner cartridge with a new one.
What does 'No Toner' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'No Toner', it means the toner cartridge is not installed correctly. Pull out the drum unit, remove the toner cartridge, and then put it back into the drum unit.
Why does my Brother MFC-7360N All in One Printer say 'Access Denied'?
If your Brother All in One Printer displays 'Access Denied', it means the function you're trying to use is restricted by Secure Function Lock. Contact your administrator to check your Secure Function Lock settings.
General| Duplex printing | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Scan to | E-mail, File, Image, OCR |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Image formats supported | BMP, JPG, PNG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| PC free copying | Yes |
| Maximum copy resolution | 600 x 600 DPI |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Dimensions (WxDxH) | 405 x 399 x 316 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Compatible operating systems | Linux Mac OS X 10.4.11, 10.5.x, 10.6x Windows 7, Vista, XP, 2000 |
| Faxing | Mono faxing |
| Fax memory | 400 pages |
| Modem speed | 14.4 Kbit/s |
| Fax speed dialing (max numbers) | 208 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Total number of input trays | 1 |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Internal memory | 32 MB |
| Processor family | ARM |
| Compatible memory cards | Not supported |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Maximum print size | 216 x 356 mm |
| Media weight (tray 1) | 60 - 105g/m2 |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Non-ISO print media sizes | Executive |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Supported network protocols (IPv4) | TCP/IP (IPv4 & IPv6) |
| Direct printing | - |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power consumption (standby) | 0.9 W |
| Power consumption (PowerSave) | 65 W |
| Power consumption (average operating) | 495 W |
| Package weight | 14800 g |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | 10000 pages per month |
Explains symbols and conventions used in the manual for warnings, cautions, and notes.
Details warnings about electrical hazards, hot surfaces, and handling the product safely.
Provides safety instructions for using the power cord and extension cords.
Guidance on how to read and understand the user documentation for the machine.
Instructions on how to access the Advanced User's Guide, Software User's Guide, and Network User's Guide.
Information on how to access Brother support online, by phone, and through customer service.
Explains the function of each key on the control panel, including One Touch, FAX, COPY, PRINT, and LCD.
Instructions for setting paper type and size to ensure optimal print quality.
Guidelines for handling and using special paper types like envelopes and labels.
How to change fax resolution for better quality, for next fax or default settings.
Instructions on how to send the same fax message to multiple recipients efficiently.
Enables sending important documents immediately without waiting for memory transmission.
Guides on selecting the appropriate receive mode based on telephone line services.
Allows receiving faxes automatically even if the call is answered manually.
Options to receive faxes remotely, including Fax Forwarding, Paging, Fax Storage, and PC-Fax Receive.
Chart showing options for storing One Touch or Speed Dial numbers with IFAX and E-mail.
Instructions on how to set up Group numbers for sending the same fax to many recipients.
Procedures for replacing toner cartridges and drum units when indicated by the machine.
Steps for cleaning the machine's exterior, scanner, and corona wire for optimal performance.
List of common error messages, their causes, and recommended actions to resolve them.
Troubleshooting tips for issues related to paper feeding, jams, and curling.
Guidance for resolving issues with network printing, scanning, and PC-Fax features.
Explains how to navigate the menu table to program machine settings and options.
Details on setting up TX Lock, Secure Function Lock, and Setting Lock for machine security.
Provides information on printer type, memory, power source, and consumption.
Details on supported document sizes, paper types, weights, and output tray capacity.
Technical details for fax capabilities, modem speed, resolution, and copy functions.
