Brother MFC-8420 - Page 102

SETUP SEND 6 - 4
5
To send a single page, press
2
(or
press
Start
again).The MFC starts
sending the document.
—OR—
To send more than one page,
press
1
and go to Step 6.
6
Place the next page on the
scanner glass.
Press
Set
.
The MFC starts scanning. (Repeat
Steps 5 and 6 for each additional
page.)
■
If the memory is full and you are faxing a single page, it will
be sent in real time.
■
If you need to cancel before the fax is sent, press
Stop/Exit
.
Flatbed Fax:
Next Page?
▼
1.Yes
▲
2.No(Send)
Select
▲▼
& Set
Flatbed Fax:
Set Next Page
Then Press Set