Brother MFC-8420 - Temporary Copy Settings

10 - 2 MAKING COPIES
Temporary copy settings
You can improve your copies by using the Temporary Copy Keys:
Enlarge/Reduce
,
Contrast
,
Quality
,
Tray Select
,
Sort
and
N in 1
(For MFC-8420) or
Duplex/N in 1
(For MFC-8820D). These
settings are temporary, and the MFC returns to Fax mode 1 minute
after it finishes copying. If you want to use these temporary settings
again, place the next document in the ADF or on the scanner glass
within that time.
However, if you have set the Mode Timer for Copy and Scan modes
to 0 or 30 seconds, the MFC returns to the default settings after the
number of seconds that has been set for Mode Timer. (See Setting
the Mode Timer on page 4-6 and Using the Copy keys (Temporary
settings) on page 10-6.)
While the MFC is copying, incoming faxes will be received into
the memory instead of being printed.
Temporary Copy Keys