Brother MFC-8420 - Storing Speed-Dial Numbers

7 - 3 AUTO DIAL NUMBERS AND DIALLING OPTIONS
Storing Speed-Dial numbers
You can store Speed-Dial numbers, so that when you dial you will
only have to press a few keys (
Search/Speed Dial
,
#
, the
three-digit number, and
Start
). The MFC can store 300 Speed-Dial
numbers.
1
Press
Menu
,
2
,
3
,
2
.
2
Use the dial pad to enter a
three-digit Speed-Dial number
(001-300).
(For example, press
005
.)
Press
Set
.
If you have not installed the optional LAN board (NC-9100h), go
to Step 4.
—OR—
If you have installed optional LAN board (NC-9100h), the MFC
will ask you if have the Speed-Dial is for a fax/telephone number
or an e-mail address. Go to Step 3.
3
Press or to select
Fax/Tel
.
Press
Set
.
4
Enter the phone or fax number (up
to 20 digits).
Press
Set
.
5
Use the dial pad to enter the name (up to 15 characters).
Press
Set
.
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Press
Set
to store the number without a name.
6
Go to Step 2 to store another Speed-Dial number.
—OR—
Press
Stop/Exit
.
23.Set Quick-Dial
2.Speed-Dial
Speed-Dial? #
Enter & Set Key
23.Set Quick-Dial
#100
▲
Fax/Tel
▼
E-Address
Select
▲▼
& Set