Brother MFC-8420 - Printing Reports; MFC Settings and Activity; Customizing the Transmission Verification Report

9 - 1 PRINTING REPORTS
9
MFC settings and activity
You need to set up the Transmission Verification Report and Journal
Period in the menu table.
Press
Menu
,
2
,
4
,
1
.
—OR—
Press
Menu
,
2
,
4
,
2
.
Customizing the
Transmission Verification Report
You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whether the
transmission was successful (OK). If you select
On
or
On+Image
, the
report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again. Selecting
On+Image
or
Off+Image
will print a section of the fax’s first page
on the report to help you remember.
1
Press
Menu
,
2
,
4
,
1
.
2
Press or to select
Off
,
Off+Image
,
On
or
On+Image
.
Press
Set
.
3
Press
Stop/Exit
.
Printing reports
When the feature is
Off
, the Report will only print it there is a
transmission error. (NG).
24.Report Setting
1.XMIT Report
2.Journal Period
Select
▲▼
& Set
24.Report Setting
1.XMIT Report
▲
On
▼
On+Image
Select
▲▼
& Set