Brother MFC-8420 - Network Scanning; Registering Your PC with the MFC

19 - 1 NETWORK SCANNING
19
To use the MFC as a Network Scanner, the NC-9100h Network
board should be installed into the MFC and configured with TCP/IP
and mail server settings if you use Scan to E-mail (E-mail server).
You can set or change NC-9100h settings from the control panel or
with the Professional utility or Web Management BRAdmin. (Please
see the NC-9100h User's Guide on the CD-ROM.)
Registering your PC with the MFC
If you need to change the MFC that was registered to your PC during
the installation of MFL-Pro (see the Quick Setup Guide), follow the
steps below.
1
For Windows
®
98/Me/2000
From the Start menu, select Control Panel, Scanners and
Cameras, and then right-click Scanner Device icon and select
Properties to view the Network Scanner Properties dialog box.
For Windows
®
XP
From the Start menu, select Control Panel, Printers and
Other Hardware, Scanner and Cameras (or Control Panel,
Scanners and Cameras).
Network Scanning
(Windows
®
98/98SE/Me/2000 Professional and XP only)