Brother MFC-8420 - Fax Detect

SETUP RECEIVE 5 - 4
Fax Detect
When you use this feature, you don’t have to press
Start
or the
Remote Activation Code
51
when you answer a fax call. Selecting
On
allows the MFC to receive fax calls automatically, even if you lift
the handset of an extension or external phone. When you see
Receiving
on the LCD or when you hear ‘chirps’ through the
handset of an extension phone connected to another wall
socket/phone socket, just replace the handset and your MFC will do
the rest. Selecting
Off
means you’ll have to activate the MFC
yourself by lifting the handset of an external or extension phone, and
then press
Start
on the MFC—OR—by pressing
51
if you are not
at your MFC. (See Operation from extension telephones on page
5-8.)
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu
,
2
,
1
,
3
.
3
Use or to select
On
(or
Off
).
Press
Set
.
4
Press
Stop/Exit
.
If this feature is set to
On
, but your MFC doesn’t connect a fax
call when you lift a extension or external phone handset, press
the Remote Activation Code
51
.
If you send faxes from a computer on the same phone line and
the MFC intercepts them, set
Fax Detect
to
Off
.
21.Setup Receive
3.Fax Detect
▲
On
▼
Off
Select
▲▼
& Set