Brother MFC-8420 - Setting up the Password; Turning Memory Security on; Turning Memory Security off

SETUP SEND 6 - 24
Setting up the password
1
Press
Menu
,
2
,
0
,
1
.
2
Enter a 4-digit number for the
password.
Press
Set
.
If you are entering the password for the first time, the LCD
shows
Verify:
.
3
Re-enter the password.
Press
Set
.
Turning Memory Security on
1
Press
Menu
,
2
,
0
,
1
.
2
Press or to select
Set
Security
.
Press
Set
.
3
Enter the registered 4-digit password.
Press
Set
.
The MFC goes offline and the LCD shows
Secure Mode
.
Turning Memory Security off
1
Press
Menu
.
Enter the registered 4-digit password and press
Set
.
2
Memory Security is automatically turned off and the LCD shows
the Date and Time.
If you forget the Memory Security password, please call your
Brother dealer for service.
If there is a power failure, the data in the memory will remain for
up to 4 days.
If you enter the wrong Password, the LCD shows
Wrong
Password
and stays offline. The MFC will stay in Secure Mode
until the registered password is entered.
20.Miscellaneous
1.Mem Security
New Passwd:xxxx
Enter & Set Key
20.Miscellaneous
1.Mem Security
▲
Set Security
▼
Set Password
Select
▲▼
& Set