Brother MFC-8420 - How to Access the Scanner

HOW TO SCAN USING WINDOWS
®
13 - 2
How to access the Scanner
1
Open the software application (ScanSoft
®
PaperPort
®
) to scan
a document.
2
Select Scan from the File drop-down menu or select the Scan
button. The Scan pane appears in the left panel.
3
Select Brother MFC-8820D, Brother MFC-8820D USB or
Brother MFC-8820D LAN
from the Scanner drop-down list box.
4
Click Scan.
The Brother MFC-8820D, Brother MFC-8820D USB or Brother
MFC-8820D LAN Scanner Setup dialog box will appear:
The instructions for scanning in this Guide are for when you use
ScanSoft
®
PaperPort
®
8.0SE.
If the MFC is connected via:
Parallel-use Brother MFC-8820D
USB-use Brother MFC-8820D USB
LAN-use Brother MFC-8820D LAN