Brother MFC-8420 - Using the Scan Key; Scan to E-Mail (PC)

19 - 5 NETWORK SCANNING
Using the Scan key
Scan to E-mail (PC)
When you select Scan to E-mail (PC) your document will be scanned
and sent directly to the PC you designated on your network. The
Brother SmartUI will activate the default E-mail application on the
designated PC for addressing to the recipient. You can scan a black
and white or color document and it will be sent with the E-mail from
the PC as an attachment.
You can change the (
Scan
) configuration. For Windows
®
98/98SE/Me/2000: (See Scan to E-mail on page 14-10 to 14-11.)
(For Windows
®
XP: See Hardware Section: Changing the Scan to
button configuration on page 15-5 to 15-9.)
1
Place the document face up in the ADF, or face down on the
scanner glass.
2
Press (
Scan
).
3
Press or to select
Scan
to E-Mail
.
Press
Set
.
4
Press or to select
PC
.
Press
Set
.
—OR—
If there is not other selection, go to Step 5.
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a Network scan from the Brother
Control Center (SmartUI).
▲
Scan to E-Mail
Scan to Image
Scan to OCR
▼
Scan to File
Select
▲▼
& Set