Brother MFC-8420 - Duplex (1 in 1) (for MFC-8820 D)

MAKING COPIES 10 - 17
Duplex (1 in 1) (For MFC-8820D)
Make a double-sided copy from a single-sided document
1
Press (
Copy
) to illuminate it in green. Place the
document face up in the ADF, or face down the scanner glass.
2
Use the dial pad to enter the number of copies you want
(up to 99).
3
Press
Duplex/N in 1
and or to select
Duplex(1 in 1)
.
Press
Set
.
4
Press or to select
Portrait1
,
Portrait2
,
Landscape1
or
Landscape2
.
—OR—
If you select
Portrait1
or
Landscape2
, go to Step 6.
Press
Set
.
5
Press or to select
Single Sided
for the document
(If you are using the scanner glass or changed the number of
copies at Step 2, this option will not appear).
Press
Set
.
6
Press
Start
to scan the document.
If you placed the document in the ADF, the MFC starts printing.
—OR—
If you placed the document on the scanner glass, go to Step 7.
7
Place the next document on the scanner glass.
Select
1
and press
Set
or press
1
to copy next page.
After all the pages of the document have been scanned,
select
2
and press
Set
, or press
2
to print.
2
1
1
2