Brother MFC-8420 - Page 124

AUTO DIAL NUMBERS AND DIALLING OPTIONS 7 - 2
4
Enter a number (up to 20 digits).
Press
Set
.
■
If you want to enter a pause in the dialling sequence (for
example, to access an outside line), press
Redial/Pause
as you are entering the digits.
Each key press of
Redial/Pause
enters a 3.5 second
pause when the number is dialled, and a dash appears on
the screen.
5
Use the dial pad to enter the name (up to 15 characters).
Press
Set
.
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Press
Set
to store the number without a name.
6
Go to Step 2 to store another One-Touch number.
—OR—
Press
Stop/Exit
.
When you dial an auto dial number, the LCD shows the name
and number you’ve stored, or, if you haven’t stored a name, only
the number you’ve stored.