11 - 14 USING THE MFC AS A PRINTER
4
Using both hands put the envelope in the manual feed tray until
the front edge of the envelope touches the paper feed roller and
the MFC will grip the envelope.
5
After the printed envelope comes out of the MFC, the MFC will
wait until you put in the next envelope. Repeat Step 4 for each
envelope you want to print.
6
Send the print data to the MFC.
7
After you finish the print job, close the back output tray.
■
Make sure the envelope is straight as you insert it in the
manual feed tray. If it is not, the envelope may not be fed
properly, resulting in a skewed printout or a jam.
■
Do not put more than one envelope in the manual feed tray
at any one time, or it may cause a jam.
■
Put the envelope in the manual feed tray, making sure that
the side to be printed on is face up in the tray.
To Next Page
Loading...
