USING YOUR MFC WITH A MACINTOSH
®
18 - 11
For Mac OS
®
X users
You need to install the PS driver using the following instructions.
1
Select Applications from the Go menu.
2
Open the Utilities folder.
If you use a USB cable and your Macintosh is “Mac OS
®
X”, only
one printer driver for an MFC can be registered in Print Center.
If a Brother Native Driver (MFC-8420/8820D) is already listed in
Printer list, you will need to delete it and then install the PS
driver.
To use the PS driver with a USB cable, you need to set the
Emulation
to
BR-Script 3
(
Menu
,
4
,
1
) before connecting
the USB cable. (See Setting the Emulation Selection on page
11-18.)
To Next Page
Loading...
