EasyManua.ls Logo

Brother MFC-8420 - Page 389

Brother MFC-8420
427 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 - 29 TROUBLESHOOTING AND ROUTINE MAINTENANCE
2
Hold down the lock lever on the right and pull the toner cartridge
out of the drum unit.
Caution
Handle the toner cartridge carefully. If toner scatters on your hands
or clothes, immediately wipe it off or wash it with cold water.
3
Unpack the new toner cartridge. Place the used toner cartridge
into the aluminum bag and discard it according to local
regulations.
Caution
Wait to unpack the toner cartridge until immediately before you
install it in the MFC. If a toner cartridge is left unpacked for a long
period of time, the toner life is shortened.
Brother multifunction machines are designed to work with toner
of a particular specification and work to a level of optimum
performance, when used with genuine Brother toner cartridges.
Brother cannot guarantee this optimum performance if toner or
toner cartridges of other specifications are used. Brother does
not therefore recommend the use of cartridges other than
genuine Brother cartridges with this machine nor does it
recommend the refilling of empty cartridges with toner from other
sources. If damage is caused to parts of this machine as a result
of the use of toner or toner cartridges other than genuine Brother
products due to the incompatibility or lack of suitability of those
products with the machine, any repairs required as a result will
not be covered by the warranty.
Lock Lever

Table of Contents

Other manuals for Brother MFC-8420

Related product manuals