Brother MFC-8420 - Page 65

3 - 13 ON-SCREEN PROGRAMMING
If you installed optional LAN board (NC-9100h), the LCD shows
the following LAN menu.
Main Menu Submenu Menu
Selections
Options Descriptions Page
6.LAN
(option)
1.Setup
TCP/IP
1
.
BOOT Method Auto
Static
RARP
BOOTP
DHCP
You can choose the
BOOT method that
best suits you needs.
See
Network
User’s
Guide
on the
CD-ROM
2.IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3
.
Subnet Mask
[000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5.Host Name BRN_XXXXXX Enter the Host name.
6
.
WINS Config Auto
Static
You can choose the
WINS configuration
mode.
7.WINS
Server
Primary
Secondary
Specifies the IP
address of the
primary or secondary
server.
The factory settings are shown in Bold with .
to accept
to
exit
Press the Menu numbers.
(ex. Press 1, 1 for Mode Timer)
—
OR
—
to select to select