Chapter 2
12
Loading paper in the
multi-purpose tray (MP tray) 2
You can load up to 3 envelopes or special
print media in the MP tray or up to 50 sheets
of plain paper. Use this tray to print or copy on
thick paper, bond paper, labels or envelopes.
(For recommended paper to use, see Paper
capacity of the paper trays uu page 20.)
Printing on plain paper, thin paper,
recycled paper and bond paper from
the MP tray
2
a Open the MP tray and lower it gently.
b Pull out the MP tray support (1) and
unfold the flap (2).
c Put paper in the MP tray and make sure:
The paper stays under the maximum
paper mark (1).
The side to be printed on must be
face up with the leading edge (top of
the paper) in first.
The paper guides must gently touch
the sides of the paper so it will feed
correctly.
1
To Next Page
Loading...
Need help?
General
