Chapter 8
48
Storing a pause 8
Press Redial/Pause to insert a 3.5-second
pause between numbers. You can press
Redial/Pause as many times as needed to
increase the length of the pause.
Storing One Touch Dial
numbers 8
Your machine has 8 One Touch keys where
you can store 16 fax or telephone numbers
for automatic dialling. To access numbers 9
to 16, hold down Shift and then press the
One Touch key.
For MFC-8510DN: 8
You can add the IFAX and E-mail options by
downloading them. When you store One
Touch Dial numbers and the machine has the
IFAX and E-mail options installed, see For
MFC-8910DW (or if you have downloaded
the IFAX and E-mail options): uu page 48.
a Press the One Touch key where you
want to store the number.
If a number is not stored there, the LCD
shows Register Now?.
Press 1 to choose Yes.
b Enter the telephone or fax number (up to
20 characters).
Press OK.
c Do one of the following:
Enter the name using the dial pad
(up to 15 characters). To help you
enter letters, see Entering text
uu page 168.
Press OK.
Press OK to store the number
without a name.
d If you want to save a fax resolution along
with the number, do one of the following:
To store the fax resolution, press
a or b to choose Std, Fine, S.Fine
or Photo.
Press OK.
Press OK if you don't want to change
the default resolution.
For MFC-8910DW (or if you have
downloaded the IFAX and E-mail
options): 8
If you have installed the IFAX and E-mail
options on the MFC-8510DN, use this
procedure to store the One Touch Dial
numbers.
a Press the One Touch key where you
want to store the number or E-mail
address.
If a number or E-mail address is not
stored there, the LCD shows
Register Now?
Press 1 to choose Yes.
b Press a or b to choose one of the
following:
Fax/Tel
IFAX
Email Color PDF
Email Color JPG
Email Color XPS
Email Gray PDF
Email Gray JPG
Email Gray XPS
Email B&W PDF
Email B&W TIFF
Press OK.
To Next Page
Loading...
Need help?
General
