2-19
Confidential
Error
codes
Description
Refer
to:
Error
codes
Description
Refer
to:
9105 ― 9502 ―
9200 ― 9503 ―
9201
When printing from the MP tray, paper
type setting in the machine does not
match the setting in the driver.
2-68 9504 ―
9202
When printing from the paper tray 1,
paper type setting in the machine
does not match the setting in the
driver.
2-68
9505 ―
9203
When printing from the paper tray 2,
paper type setting in the machine
does not match the setting in the
driver.
2-68
9601 ―
9204
When printing from the paper tray 3,
paper type setting in the machine
does not match the setting in the
driver.
2-68
9608 ―
9205
When printing from the paper tray 4,
paper type setting in the machine
does not match the setting in the
driver.
2-68 9701
A tray set to duplex printing-
incompatible size was specified in
duplex printing.
2-72
9206
When printing from the paper tray 5,
paper type setting in the machine
does not match the setting in the
driver.
2-68 9702
When printing from paper tray 1, a
paper size not supported for paper
tray 1 was specified from the driver.
2-72
9301
When printing from the MP tray, the
MP paper empty sensor detected that
there was no paper set in the MP tray.
2-69 9703
When printing from paper tray 2, a
paper size not supported for paper
tray 2 was specified from the driver.
2-72
9302
When printing from paper tray 1, the
T1 paper empty sensor or the T1
paper feed sensor detected that there
was no paper set in paper tray 1.
2-69 9704
When printing from paper tray 3, a
paper size not supported for paper
tray 3 was specified from the driver.
2-72
9303
When printing from paper tray 2, the
T2(LT or TT) paper empty sensor
detected that there was no paper set
in paper tray 2.
2-69 9705
When printing from paper tray 4, a
paper size not supported for paper
tray 4 was specified from the driver.
2-72
9304
When printing from paper tray 3, the
T3(LT or TT) paper empty sensor
detected that there was no paper set
in paper tray 3.
2-69 9706
When printing from paper tray 5, a
paper size not supported for paper
tray 5 was specified from the driver.
2-72
9305
When printing from paper tray 4, the
T4(LT or TT) paper empty sensor
detected that there was no paper set
in paper tray 4.
2-69
9801 ―
9306
When printing from paper tray 5, the
T5TT paper empty sensor detected
that there was no paper set in paper
tray 5.
2-69
9802 ―
9309
Detected that there was no paper set
in all trays when TrayAuto was
selected for printing.
2-70 9803 ―
930A
Paper ran out during Fax / List
continuous printing.
2-71
9804 ―
9400
Firmware version of the main PCB is
older than that of the TT and LT.
2-71
9901 ―
9501 ― 9902 ―
To Next Page
Loading...
Need help?
General
