Brother MFC-8860DN - Page 151

Menu and Features
141
6.LAN (MFC-8870DW) (Continued)
1.Wired
(Continued)
1.TCP/IP
(Continued)
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
DNS server.
See Network User’s Guide on the CD-ROM.
9.APIPA On*
Off
Automatically allocates the
IP address from the link-
local address range.
0.IPv6 On
Off*
Enable or Disable the IPv6
protocol. If you want to use
the IPv6 protocol, visit
http://solutions.brother.com
for more information.
2.Ethernet Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the Ethernet link
mode.
3.Set to
Default
1.Reset 1.Yes
2.No
Restore the wired network
setting to factory default.
2.Exit
4.Wired
Enable
On*
Off
2.WLAN 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT method
that best suits your needs.
2.IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3.Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway address.
5.Node Name BRN_XXXXXX
Enter the Node name.
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
Main
Menu
Submenu Menu Selections Options Descriptions Page
Downloaded from ManualsPrinter.com Manuals