46
7
Phone line services 7
Setting the Phone Line Type 7
If you are connecting the machine to a line
that features a PBX or ISDN to send and
receive faxes, it is also necessary to change
the Phone Line Type accordingly by
completing the following steps.
a Press Menu, 0, 6.
06.Phone Line Set
a Normal
ISDN
b PBX
Select
ab & OK
b Press a or b to select PBX, ISDN (or
Normal). Press OK.
c Press Stop/Exit.
PBX and TRANSFER 7
The machine is initially set to Normal, which
lets the machine connect to a standard PSTN
(Public Switched Telephone Network) line.
However, many offices use a central
telephone system or Private Branch
Exchange (PBX). Your machine can be
connected to most types of PBX. The
machine’s recall feature supports timed break
recall only (TBR). TBR will work with most
PBX systems allowing you to gain access to
an outside line, or transfer calls to another
extension. The feature works when Tel/R is
pressed.
Note
You can program a Tel/R key press as
part of a number stored in a One-Touch or
Speed-Dial location. When programming
the One-Touch or Speed-Dial number
(Menu, 2, 3, 1 or 2, 3, 2) press Tel/R first
(the screen displays “!”) then enter the
telephone number. If you do this, you do
not need to press Tel/R each time before
you dial using a One-Touch or Speed-Dial
location. (Storing One-Touch dial
numbers on page 54 or Storing Speed-
Dial numbers on page 56.) However, if
PBX is not selected in the Phone Line
Type setting, you cannot use the One-
Touch or Speed-Dial number that Tel/R
press is programmed into.
Phone and external devices 7
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
