Phone and external devices
51
7
Telephone Answer Code 7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double) ring after the initial ring delay. If you
pick up the call on an extension phone you
can turn the F/T ring off by pressing #51
(make sure you press this between the rings).
Changing the remote codes 7
The preset fax receive code is l51. The
preset telephone answer code is #51. If you
are always disconnected when accessing
your external TAD, try changing the
three-digit remote codes, for example ###
and 555.
a Make sure you are in Fax mode .
b Press Menu 2, 1, 4.
21.Setup Receive
4.Remote Codes
a On
b Off
Select
ab & OK
c Press a or b to select On or Off.
Press OK.
d If you selected On in c, enter the new
fax receive code.
Press OK.
e Enter the new telephone answer code.
Press OK.
f Press Stop/Exit.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
