Brother MFC-8860DN - Additional Receiving Operations; Duplex Printing for Fax Mode (MFC-8860 DN and MFC-8870 DW Only); Printing a Reduced Incoming Fax

Receiving a fax
43
6
Additional receiving
operations 6
Printing a reduced incoming
fax 6
If you choose On, the machine automatically
reduces each page of an incoming fax to fit on
one page of A4, Letter, Legal or Folio size
paper.
The machine calculates the reduction ratio by
using the page size of the fax and your Paper
Size setting (Menu, 1, 3).
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 5.
21.Setup Receive
5.Auto Reduction
a On
b Off
Select ab & OK
c Press a or b to select On or Off. Press
OK.
d Press Stop/Exit.
Duplex printing for Fax mode
(MFC-8860DN and
MFC-8870DW only) 6
If you set Duplex to On for fax receive the
machine will print received faxes on both
sides of the paper.
You can use A4, Letter, Legal or Folio size of
paper for this function.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 0.
21.Setup Receive
0.Duplex
a On
b Off
Select
ab & OK
c Press a or b to choose On or Off.
Press OK.
d Press Stop/Exit.
Note
When you turn Duplex on the auto
reduction feature is also turned on.
Downloaded from ManualsPrinter.com Manuals