Dialling and storing numbers
53
8
Search 8
You can search alphabetically for names you
have stored in the One-Touch and Speed-
Dial memories.
a Press Search/Speed Dial.
b Press the dial pad key for the first letter
of the name.
(Use the chart Entering Text on page
146 to help you enter letters.)
Press OK.
c Press a or b to scroll until you find the
name you are looking for.
Press OK.
Note
You can press Resolution to change
the displayed resolution.
d Press Start.
LDAP (Lightweight Directory
Access Protocol) Search
(MFC-8860DN and
MFC-8870DW only) 8
If the machine is connected to your LDAP
server, you can search for information such
as fax numbers and E-mail addresses from
your server. (For details about how to set up
LDAP see the Network User’s Guide on the
CD-ROM.)
Fax redial 8
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
If you are sending a fax manually and the line
is busy, press Redial/Pause, wait for the
other fax machine to answer, and then press
Start to try again. If you want to make a
second call to the last number dialled, you
can save time by pressing Redial/Pause and
Start.
Redial/Pause only works if you dialled from
the control panel.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
