Brother MFC-9130CW - Page 31

Configuring your machine for a wireless network (For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
25
3
l Choose the Inner Authentication method NONE, CHAP, MS-CHAP, MS-CHAPv2, GTC or PAP.
Go to step m.
NOTE
Depending on your Authentication method, the Inner Authentication method selections differ.
m Choose encryption type TKIP or AES.
Do one of the following:
If your Authentication method is EAP-TLS, go to step n.
For other Authentication methods, go to step o.
n The machine will display a list of available Client Certificates. Choose the certificate and go to step o.
o Choose the verification method No Verification, CA or CA + Server ID.
Do one of the following:
If you chose CA + Server ID, go to step p.
For other selections, go to step q.
NOTE
If you have not imported a CA certificate on your machine, the machine will display No Verification.
To import a CA certificate, see Using Certificates for device security on page 84.
p Enter the server ID. (For information on how to enter text: see Quick Setup Guide.)
Press OK. Go to step q.