Brother MFC-9140CDN - Setting the Fax Logic (Sending and Receiving Sequence)

General Setup
5
1
Setting the Fax Logic
(sending and receiving
sequence)
1
You can change the process of manual fax
send or receive. If you often send or receive
a fax manually to/from the other party at the
end of a conversation, set the Fax Mode to
Easy Mode.
If you set to Easy Mode: You can send or
receive a fax manually just simply press
Fax Start. Make sure the other party's
machine is ready to send or receive a fax. If
you are a caller, press Fax Start to send a
fax. If you are a receiver, press Fax Start
to receive a fax.
If you set to Advanced Mode: No matter you
are a caller or receiver, you can choose you
will send or receive a fax manually. When you
press Fax Start, the machine will ask you
to choose Send or Receive. If you want to
send a fax, press Send to send a fax. If you
want to receive a fax, press Receive to
receive a fax.
NOTE
Even if you set either Easy Mode or
Advanced Mode and if there is a
document in the ADF, the document in the
ADF will be sent by pressing Fax Start.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Miscellaneous.
f Press Miscellaneous.
g Press Fax Mode.
h Press Easy Mode or Advanced Mode.
i Press .