Brother MFC-9140CDN - Setup Method; Caller ID Feature

Dialling and storing numbers
45
5
Setup Method 5
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Miscellaneous.
f Press Miscellaneous.
g Press Caller ID Type.
h Press Auto, FSK or DTMF.
i Press .
Caller ID feature 5
The Caller ID feature lets you use the Caller
ID subscriber service offered by many local
telephone companies. Call your telephone
company for details. This service shows the
telephone number, or name if it is available,
of your caller as the line rings.
After a few rings, the Touchscreen will show
the telephone number of your caller (and
name, if available). Once you answer a call,
the Caller ID information disappears from the
Touchscreen, but the call information stays
stored in the Caller ID memory.
You can view the list or choose one of these
numbers to add to Address Book, or delete
from the history.
 You can see the number (or name).
 The ID Unknown message means the
call originated outside your Caller ID
service area.
 The ID Withheld message means the
caller has intentionally blocked
transmission of Caller ID information.
You can print a list of the Caller ID information
received by your machine (see How to print a
report on page 52).
NOTE
• The Caller ID service varies with different
carriers. Call your local telephone
company to find out about the kind of
service available in your area.
• This feature may not be available in some
countries.