Brother MFC-9140CDN - Setting and Changing the Administrator Password

Chapter 2
8
Setting and changing the
Administrator Password 2
You can configure these settings using a web
browser. To set up the web page, see Before
you begin to use Secure Function Lock 2.0
on page 7. Then set up the administrator.
Setting the administrator password 2
The administrator password is used to set up
users and to turn Secure Function Lock on or
off (see Setting up restricted users on page 9
and Turning Secure Function Lock on/off
on page 10).
a Click Administrator.
b Click Secure Function Lock.
c Type a four-digit number for the
password in the New Password field.
d Retype the password in the
Retype Password field.
e Click Submit.
Changing the administrator password2
a Click Administrator.
b Click Secure Function Lock.
c Type a four-digit number for the
password in the
New Password field.
d Retype the password in the
Retype Password field.
e Click Submit.