Troubleshooting and routine maintenance
151
C
2 Push the drum unit in until it stops.
g Close the front cover of the machine.
h Plug the machine’s power cord back into
the AC power outlet first, and reconnect
all cables and telephone line cord. Turn
on the machine’s power switch.
Cleaning the corona wires C
If you have print quality problems, clean the
corona wires as follows:
a Turn off the machine’s power switch.
Unplug the telephone line cord first,
disconnect all cables, and then unplug
the power cord from the AC power
outlet.
b Press the front cover release button and
then open the front cover.
To Next Page
Loading...
