Brother MFC-9440CN - Adjusting Brightness, Contrast, Color

Chapter 12
76
Adjusting brightness,
contrast and color 12
Brightness 12
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Options.
Press a or b to choose Brightness.
Press OK.
e Press a to make a lighter copy or press
b to make a darker copy.
Press OK.
f Press Black Start or Color Start.
To change the default setting follow the steps
below:
a Press Menu, 3, 2.
Copy
2.Brightness
b Press a to make a lighter copy or press
b to make a darker copy.
Press OK.
c Press Stop/Exit.
Contrast 12
Adjust the contrast to help an image look
sharper and more vivid.
To temporarily change the contrast setting,
follow the steps below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Options.
Press a or b to choose Contrast.
Press OK.
e Press a or b to increase or decrease the
contrast.
Press OK.
f Press Black Start or Color Start.
To change the default setting follow the steps
below:
a Press Menu, 3, 3.
Copy
3.Contrast
b Press a or b to increase or decrease the
contrast.
Press OK.
c Press Stop/Exit.