Brother MFC-9440CN - Polling and Report Printing; Polling Receive; Sequential Polling

67
10
10
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polling receive 10
Polling receive lets you call another fax
machine to receive a fax.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 7.
Setup Receive
7.Polling RX
c Enter the fax number you are polling.
Press Black Start or Color Start.
The LCD shows Dialing.
Sequential polling 10
Sequential polling lets you request
documents from several fax machines in one
operation. Afterwards, a Sequential Polling
Report will be printed.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 7.
Setup Receive
7.Polling RX
c Specify the fax machines you want to
poll by using One-Touch, Speed-Dial,
Search, a Group and or the dial pad.
You must press OK between each
location.
d Press Black Start or Color Start.
The machine polls each number or
Group number in turn for a document.
Press Stop/Exit while the machine is dialing
to cancel the polling process.
To cancel all sequential polling receive jobs,
press Menu, 2, 6. (See Checking and
canceling waiting jobs on page 39.)
Polling 10