EasyManua.ls Logo

Brother MFC-9460CDN - Page 61

Brother MFC-9460CDN
590 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-22
Confidential
AB Scanning resolution change
error in the maintenance mode.
2-80
AC Scanning failure upon FAX
transmission (Second side)
(Document scanner unit failure
for the first time.)
2-81
AD Timeout error during waiting for
completion of scanning DMA
transfer.
2-81
AE The document scanner unit fails
to detect the home position.
2-81
AF
The white tape cannot be detected.
2-82
B0 Scanning FFC connection
failure.
2-82
B1 Dark level offset data level error
for scanning.
2-83
B2 Gain control data level error for
scanning.
2-83
B3
The scanning area setting left
edge detection error. (white tape)
2-83
B4
The scanning area setting right
edge detection error. (white tape)
2-83
B5 The scanning area setting
reduction detection error. (white
tape)
2-83
B6 The scanning area setting
enlargement detection error.
(white tape)
2-83
B7 A/D converter standard voltage
failure; at High side.
2-84
B8 A/D converter standard voltage
failure; at Low side.
2-84
B9 Scanning light adjustment error. 2-84
Error
codes
Problem
Refer
to:
BA Scanning outside light detection
error.
2-84
BB White level data error. 2-85
BC Scanning failure upon FAX
transmission. (Second side)
(Document scanner unit failure
for the second time or later.)
2-85
BD Black level data error. 2-85
BE The scanning area start edge
detection error.
2-85
BF The document is too long for
ADF duplex feeding.
2-86
C0 Failure to detect a new black
toner cartridge.
2-86
C1 Failure to detect a new yellow
toner cartridge.
2-86
C2 Failure to detect a new magenta
toner cartridge.
2-86
C3 Failure to detect a new cyan
toner cartridge.
2-86
C4 Paper tray 2 pressing plate up/
down error.
2-87
C5
Energization failure of erase lamp.
2-87
C6 Pressure engagement/
disengagement failure of toner
cartridge.
2-88
C7 Insufficient memory. 2-88
C8 RAM area for secure data full. 2-88
C9 Defective DIMM is installed. 2-89
CA USB device overcurrent error. 2-89
CB The belt unit is not installed. 2-89
CC The fuser unit is not installed. 2-90
CD The drum unit is not installed. 2-90
Error
codes
Problem
Refer
to:

Table of Contents

Other manuals for Brother MFC-9460CDN

Related product manuals